BRD Steel reinforcing wire mesh, is a multi-purpose suitable for most structural concrete slabs and footings. Made from high-strength steel welded uniformly to form a square or rectangular grid. Available in Various Mesh Orientations and Customized Purposes.

BRDeco, Runhuxi wall putty, is ready to use filler for patching up interior holes, cracks, chips, and dents in walls.

Rock wool products are made from natural rock such as basalt and dolomite.

External wall cladding insulation system panel or board is a general class of non-load bearing building cladding systems that provides exterior walls with an insulated, water-resistant, finished surface in an integrated composite material system.

Calcium Silicate Board is a composite material made of quartz sand, cement and cellulose fibers. It is used for ceiling, interior wall partition and etc. The normal size is 1220×2440mm,thickness from 4.5~15mm, and density is 1.2~1.6g/cm3. There are low-density, middle-density and high-density.

Calcium Silicate Board is a composite material made of quartz sand, cement and cellulose fibers. It is used for ceiling, interior wall partition and etc. The normal size is 1220×2440mm,thickness from 4.5~15mm, and density is 1.2~1.6g/cm3. There are low-density, middle-density and high-density.

Calcium Silicate Board is a composite material made of quartz sand, cement and cellulose fibers. It is used for ceiling, interior wall partition and etc. The normal size is 1220×2440mm,thickness from 4.5~15mm, and density is 1.2~1.6g/cm3. There are low-density, middle-density and high-density.

Extruded polystyrene (XPS) insulation board is made from polystyrene resin and small amount of additives through heating and extruding system. It is a rigid foam with honeycomb structure. Owing to its 100% closed cell structure, it is highly moisture resistant and waterproof.

Extruded polystyrene (XPS) insulation board is made from polystyrene resin and small amount of additives through heating and extruding system. It is a rigid foam with honeycomb structure. Owing to its 100% closed cell structure, it is highly moisture resistant and waterproof.

Extruded polystyrene (XPS) insulation board is made from polystyrene resin and small amount of additives through heating and extruding system. It is a rigid foam with honeycomb structure. Owing to its 100% closed cell structure, it is highly moisture resistant and waterproof.

BRD unfired clay is made from a blend of unfired clay and sands. The most attractive is its look and functional properties, particular are that of breath-ability and known abilities to regulate relative humidity (RH). Next to air tightness and embodied energy, breath-ability is possibly the most critical consideration in building design.

Pir bord Keep temperature Thermal conductivity is very small, good thermal insulation performance, creat a comfortable environment.

PU Hard Foam Panel have offers a high performance, light weight and robust system that requires only a single fix installation process.

Glasswool sandwich board is a new type of construction panel which made of outer layers both sides of steel coil and inner layer of polystyrene. It is a light weight and economic kind of panels.

Glass wool is with unique centrifugal technique, the molten glass fibrosis and thermos setting resins is given priority to environmental protection formula of binder for processed goods, is a kind of surface by only a few microns in diameter glass fiber, elastic fiber glass products. Because of glass wool steel has a large number of small space, with thermal insulation, sound absorption, noise reduction and safety protection etc,. building fire prevention is the best material to heat preservation and heat insulation, sound-absorbing noise reduction.